An Introduction to OpenSSL Programming, Part I of II

Eric Rescorla

Issue #89, September 2001

Do you have a burning need to build a simple web client and server pair? Here's why OpenSSL is for you.

The quickest and easiest way to secure a TCP-based network application is with SSL. If you're working in C, your best choice is probably to use OpenSSL (http://www.openssl.org/). OpenSSL is a free (BSD-style license) implementation of SSL/TLS based on Eric Young's SSLeay package. Unfortunately, the documentation and sample code distributed with OpenSSL leave something to be desired. Where they exist, the manual pages are pretty good, but they often miss the big picture, as manual pages are intended as a reference, not a tutorial.

The OpenSSL API is vast and complicated, so we won't attempt to provide anything like complete coverage here. Rather, the idea is to teach you enough to work effectively from the manual pages. In this article, the first of two, we will build a simple web client and server pair that demonstrate the basic features of OpenSSL. In the second article, we will introduce a number of advanced features, such as session resumption and client authentication.

I assume that you're already familiar with SSL and HTTP, at least at a conceptual level. If you're not, a good place to start is with the RFCs (see Resources).

For space reasons, this article only includes excerpts from the source code. The complete source code is available in machine-readable format from the author's web site at http://www.rtfm.com/openssl-examples/.

Programs

Our client is a simple HTTPS (see RFC 2818) client. It initiates an SSL connection to the server and then transmits an HTTP request over that connection. It then waits for the response from the server and prints it to the screen. This is a vastly simplified version of the functionality found in programs like fetch and cURL.

The server program is a simple HTTPS server. It waits for TCP connections from clients. When it accepts one it negotiates an SSL connection. Once the connection is negotiated, it reads the client's HTTP request. It then transmits the HTTP response to the client. Once the response is transmitted it closes the connection.

Our first task is to set up a context object (an SSL_CTX). This context object is then used to create a new connection object for each new SSL connection. These connection objects are used to do SSL handshakes, reads and writes.

This approach has two advantages. First, the context object allows many structures to be initialized only once, improving performance. In most applications, every SSL connection will use the same keying material, certificate authority (CA) list, etc. Rather than reloading this material for every connection, we simply load it into the context object at program startup. When we wish to create a new connection, we can simply point that connection to the context object. The second advantage of having a single context object is that it allows multiple SSL connections to share data, such as the SSL session cache used for session resumption. Context initialization consists of four primary tasks, all performed by the initialize_ctx() function, shown in Listing 1.

Listing 1. initialize_ctx()

Before OpenSSL can be used for anything, the library as a whole must be initialized. This is accomplished with SSL_library_init(), which primarily loads up the algorithms that OpenSSL will be using. If we want good reporting of errors, we also need to load the error strings using SSL_load_error_strings(). Otherwise, we won't be able to map OpenSSL errors to strings.

We also create an object to be used as an error-printing context. OpenSSL uses an abstraction called a BIO object for input and output. This allows the programmer to use the same functions for different kinds of I/O channels (sockets, terminal, memory buffers, etc.) merely by using different kinds of BIO objects. In this case we create a BIO object attached to stderr to be used for printing errors.

If you're writing a server or a client that is able to perform client authentication, you'll need to load your own public/private key pair and the associated certificate. The certificate is stored in the clear and is loaded together with the CA certificates forming the certificate chain using SSL_CTX_use_certificate_chain_file(). SSL_CTX_use_PrivateKey_file() is used to load the private key. For security reasons, the private key is usually encrypted under a password. If it is, the password callback (set using SSL_CTX_set_default_passwd_cb()) will be called to obtain the password.

If you're going to be authenticating the host to which you're connected, OpenSSL needs to know what CAs you trust. The SSL_CTX_load_verify_locations() call is used to load the CAs.

In order to have good security, SSL needs a good source of strong random numbers. In general, it's the responsibility of the application to supply some seed material for the random number generator (RNG). However, OpenSSL automatically uses /dev/urandom to seed the RNG, if it is available. Because /dev/urandom is standard on Linux, we don't have to do anything for this, which is convenient because gathering random numbers is tricky and easy to screw up. Note that if you're on a system other than Linux, you may get an error at some point because the random number generator is unseeded. OpenSSL's rand(3) manual page provides more information.

The Client

Once the client has initialized the SSL context, it's ready to connect to the server. OpenSSL requires us to create a TCP connection between client and server on our own and then use the TCP socket to create an SSL socket. For convenience, we've isolated the creation of the TCP connection to the tcp_connect() function (which is not shown here but is available in the downloadable source).

Once the TCP connection has been created, we create an SSL object to handle the connection. This object needs to be attached to the socket. Note that we don't directly attach the SSL object to the socket. Rather, we create a BIO object using the socket and then attach the SSL object to the BIO.

This abstraction layer allows you to use OpenSSL over channels other than sockets, provided you have an appropriate BIO. For instance, one of the OpenSSL test programs connects an SSL client and server purely through memory buffers. A more practical use would be to support some protocol that can't be accessed via sockets. For instance, you could run SSL over a serial line.

The first step in an SSL connection is to perform the SSL handshake. The handshake authenticates the server (and optionally the client) and establishes the keying material that will be used to protect the rest of the traffic. The SSL_connect() call is used to perform the SSL handshake. Because we're using blocking sockets, SSL_connect() will not return until the handshake is completed or an error has been detected. SSL_connect() returns 1 for success and 0 or negative for an error. This call is shown below:

/* Connect the TCP socket*/
sock=tcp_connect(host,port);
/* Connect the SSL socket */
ssl=SSL_new(ctx);
sbio=BIO_new_socket(sock,BIO_NOCLOSE);
SSL_set_bio(ssl,sbio,sbio);
if(SSL_connect(ssl)<=0)
  berr_exit("SSL connect error");
if(require_server_auth)
  check_cert(ssl,host);

When we initiate an SSL connection to a server, we need to check the server's certificate chain. OpenSSL does some of the checks for us, but unfortunately others are application specific, and so we have to do those ourselves. The primary test that our sample application does is to check the server identity. This check is performed by the check_cert function, shown in Listing 2.

Listing 2. check_cert() Function

Once you've established that the server's certificate chain is valid, you need to verify that the certificate you're looking at matches the identity that you expect the server to have. In most cases, this means that the server's DNS name appears in the certificate, either in the Common Name field of the Subject Name or in a certificate extension. Although each protocol has slightly different rules for verifying the server's identity, RFC 2818 contains the rules for HTTP over SSL/TLS. Following RFC 2818 is generally a good idea unless you have some explicit reason to do otherwise.

Because most certificates still contain the domain name in the Common Name field rather than in an extension, we show only the Common Name check. We simply extract the server's certificate using SSL_get_peer_certificate() and then compare the common name to the hostname we're connecting to. If they don't match, something is wrong and we exit.

Before version 0.9.5, OpenSSL was subject to a certificate extension attack. To understand this, consider the case where a server authenticates with a certificate signed by Bob, as shown in Figure 1. Bob isn't one of your CAs, but his certificate is signed by a CA you trust.

Figure 1. An Extended Certificate Chain

If you accept this certificate you're going to be in a lot of trouble. The fact that the CA signed Bob's certificate means that the CA believes that it has verified Bob's identity, not that Bob can be trusted. If you know that you want to do business with Bob, that's fine, but it's not very useful if you want to do business with Alice, and Bob (of whom you've never heard) is vouching for Alice.

Originally, the only way to protect yourself against this sort of attack was to restrict the length of certificate chains so that you knew that the certificate you were looking at was signed by the CA. The X.509 version 3 contains a way for a CA to label certain certificates as other CAs. This permits a CA to have a single root that then certifies a bunch of subsidiary CAs.

Modern versions of OpenSSL (0.9.5 and later) check these extensions, so you're automatically protected against extension attacks whether or not you check chain length. Versions prior to 0.9.5 do not check the extensions at all, so you have to enforce the chain length if using an older version. 0.9.5 has some problems with checking, so if you're using 0.9.5, you should probably upgrade. The #ifdefed code in initialize_ctx() provides chain-length checking with older versions. We use the SSL_CTX_set_verify_depth() to force OpenSSL to check the chain length. In summary, it's highly advisable to upgrade to 0.9.6, particularly because longer (but properly constructed) chains are becoming more popular. The absolute latest (and best) version of OpenSSL is .0.9.66.

We use the code shown in Listing 3 to write the HTTP request. For demonstration purposes, we use a more-or-less hardwired HTTP request found in the REQUEST_TEMPLATE variable. Because the machine to which we're connecting may change, we do need to fill in the Host header. This is done using snprintf(). We then use SSL_write() to send the data to the server. SSL_write()'s API is more or less the same as write(), except that we pass in the SSL object instead of the file descriptor.

Listing 3. Writing the HTTP Request

Experienced TCP programmers will notice that instead of looping around the write, we throw an error if the return value doesn't equal the value we're trying to write. In blocking mode, SSL_write() semantics are all or nothing; the call won't return until all the data is written or an error occurs, whereas write() may only write part of the data. The SSL_MODE_ENABLE_PARTIAL_WRITE flag (not used here) enables partial writes, in which case you'd need to loop.

In old-style HTTP/1.0, the server transmits its response and then closes the connection. In later versions, persistent connections that allow multiple sequential transactions on the same connection were introduced. For convenience and simplicity we will not use persistent connections. We omit the header that allows them, causing the server to use a connection close to signal the end of the response. Operationally, this means that we can keep reading until we get an end of file, which simplifies matters considerably.

OpenSSL uses the SSL_read() API call to read data, as shown in Listing 4. As with read(), we simply choose an appropriate-sized buffer and pass it to SSL_read(). Note that the buffer size isn't really that important here. The semantics of SSL_read(), like the semantics of read(), are that it returns the data available, even if it's less than the requested amount. On the other hand, if no data is available, then the call to read blocks.

Listing 4. Reading the Response

The choice of BUFSIZZ, then, is basically a performance trade-off. The trade-off is quite different here from when we're simply reading from normal sockets. In that case, each call to read() requires a context switch into the kernel. Because context switches are expensive, programmers try to use large buffers to reduce them. However, when we're using SSL the number of calls to read(), and hence context switches, is largely determined by the number of records the data was written in rather than the number of calls to SSL_read().

For instance, if the client wrote a 1000-byte record and we call SSL_read() in chunks of 1 byte, then the first call to SSL_read() will result in the record being read in, and the rest of the calls will just read it out of the SSL buffer. Thus, the choice of buffer size is less significant when we're using SSL than with normal sockets. If the data were written in a series of small records, you might want to read all of them at once with a single call to read(). OpenSSL provides a flag, SSL_CTRL_SET_READ_AHEAD, that turns on this behavior.

Note the use of the switch on the return value of SSL_get_error(). The convention with normal sockets is that any negative number (typically -1) indicates failure, and that one then checks errno to determine what actually happened. Obviously errno won't work here because that only shows system errors, and we'd like to be able to act on SSL errors. Also, errno requires careful programming in order to be threadsafe.

Instead of errno, OpenSSL provides the SSL_get_error() call. This call lets us examine the return value and figure out whether an error occurred and what it was. If the return value was positive, we've read some data, and we simply write it to the screen. A real client would parse the HTTP response and either display the data (e.g., a web page) or save it to disk. However, none of this is interesting as far as OpenSSL is concerned, so we won't show any of it here.

If the return value was zero, this does not mean that there was no data available. In that case, we would have blocked, as discussed above. Rather, it means that the socket is closed, and there never will be any data available to read. Thus, we exit the loop.

If the return value was something negative, then some kind of error occurred. There are two kinds of errors we're concerned with: ordinary errors and premature closes. We use the SSL_get_error() call to determine which kind of error we have. Error handling in our client is pretty primitive, so with most errors we simply call berr_exit() to print an error message and exit. Premature closes have to be handled specially.

TCP uses a FIN segment to indicate that the sender has sent all of its data. SSL version 2 simply allowed either side to send a TCP FIN to terminate the SSL connection. This allowed for a truncation attack; the attacker could make it appear that a message was shorter than it was simply by forging a TCP FIN. Unless the victim had some other way of knowing what message length to expect, he or she would simply believe the length was correct.

In order to prevent this security problem, SSLv3 introduced a “close_notify” alert. The close_notify is an SSL message (and therefore secured) but is not part of the data stream itself and so is not seen by the application. No data may be transmitted after the close_notify is sent.

Thus, when SSL_read() returns 0 to indicate that the socket has been closed, this really means that the close_notify has been received. If the client receives a FIN before receiving a close_notify, SSL_read() will return with an error. This condition is called a premature close.

A naïve client might decide to report an error and exit whenever it received a premature close. This is the behavior that is implied by the SSLv3 specification. Unfortunately, sending premature closes is a rather common error, particularly common with clients. Thus, unless you want to be reporting errors all the time, you often have to ignore premature closes. Our code splits the difference. It reports the premature close on stderr but doesn't exit with an error.

If we read the response without any errors, then we need to send our own close_notify to the server. This is done using the SSL_shutdown() API call. We'll cover SSL_shutdown() more completely when we talk about the server, but the general idea is simple: it returns 1 for a complete shutdown, 0 for an incomplete shutdown and -1 for an error. Since we've already received the server's close_notify, about the only thing that can go wrong is that we have trouble sending our close_notify. Otherwise SSL_shutdown() will succeed (returning 1).

Finally, we need to destroy the various objects we've allocated. Since this program is about to exit, thus freeing the objects, this isn't strictly necessary, but it would be in a more general program.

Server

Our web server is mainly a mirror of the client but with a few twists. First, we fork() in order to let the server handle multiple clients. Second, we use OpenSSL's BIO APIs to read the client's request one line at a time, as well as to do buffered writes to the client. Finally, the server closure sequence is more complicated.

On Linux, the simplest way to write a server that can handle multiple clients is to create a new server process for each client that connects. We do that by calling fork() after accept() returns. Each new process executes independently and just exits when it's finished serving the client. Although this approach can be quite slow on busy web servers it's perfectly acceptable here. The main server accept loop is shown in Listing 5.

Listing 5. Server Accept Loop

After forking and creating the SSL object, the server calls SSL_accept(), which causes OpenSSL to perform the server side of the SSL handshake. As with SSL_connect(), because we're using blocking sockets, SSL_accept() will block until the entire handshake has completed. Thus, the only situation in which SSL_accept() will return is when the handshake has completed or an error has been detected. SSL_accept() returns 1 for success and 0 or negative for error.

OpenSSL's BIO objects are stackable to some extent. Thus, we can wrap an SSL object in a BIO (the ssl_bio object) and then wrap that BIO in a buffered BIO object, as shown below:

io=BIO_new(BIO_f_buffer());
ssl_bio=BIO_new(BIO_f_ssl());
BIO_set_ssl(ssl_bio,ssl,BIO_CLOSE);
BIO_push(io,ssl_bio);

This allows us to perform buffered reads and writes on the SSL connection by using the BIO_* functions on the new io object. At this point you might ask, why is this good? Primarily, it's a matter of programming convenience. It lets the programmer work in natural units (lines and characters) rather than SSL records.

Request

An HTTP request consists of a request line followed by a bunch of header lines and an optional body. The end of the header lines is indicated by a blank line (i.e., a pair of CRLFs, though sometimes broken clients will send a pair of LFs instead). The most convenient way to read the request line and headers is to read one line at a time until you see a blank line. We can do this using the OpenSSL_BIO_gets() call, as shown in Listing 6.

Listing 6. Reading the Request

The BIO_gets() call behaves analogously to the stdio fgets() call. It takes an arbitrary-sized buffer and a length and reads a line from the SSL connection into that buffer. The result is always null terminated (but includes the terminating LF). Thus, we simply read one line at a time until we get a line that consists of simply an LF or a CRLF.

Because we use a fixed-length buffer, it is possible, though unlikely, that we will get a line that's too long. In that event, the long line will be split over two lines. In the extremely unlikely event that the split happens right before the CRLF, the next line we read will consist of only the CRLF from the previous line. In this case we'll be fooled into thinking that the headers have finished prematurely. A real web server would check for this case, but it's not worth doing here. Note that no matter what the incoming line length is, there's no chance of a buffer overrun. All that can happen is that we'll misparse the headers.

Note that we really don't do anything with the HTTP request. We just read it and discard it. A real implementation would read the request line and the headers, figure out if there was a body and read that too.

The next step is to write the HTTP response and close the connection:

if((r=BIO_puts
  (io,"HTTP/1.0 200 OK\\r\\n"))<0)
  err_exit("Write error");
if((r=BIO_puts
  (io,"Server: EKRServer\\r\\n\\r\\n"))<0)
  err_exit("Write error");
if((r=BIO_puts
  (io,"Server test page\\r\\n"))<0)
  err_exit("Write error");
if((r=BIO_flush(io))<0)
  err_exit("Error flushing BIO");

Note that we're using BIO_puts() instead of SSL_write(). This allows us to write the response one line at a time but have the entire response written as a single SSL record. This is important because the cost of preparing an SSL record for transmission (computing the integrity check and encrypting it) is quite significant. Thus, it's a good idea to make the records as large as possible.

It's worth noting a couple of subtleties about using this kind of buffered write. First, you need to flush the buffer before you close. The SSL object has no knowledge that you've layered a BIO on top of it, so if you destroy the SSL connection you'll just leave the last chunk of data sitting in the buffer. The BIO_flush() call takes care of this. Also, by default, OpenSSL uses a 1024-byte buffer size for buffered BIOs. Because SSL records can be up to 16KB long, using a 1024-byte buffer can cause excessive fragmentation (and hence lower performance). You can use the BIO_ctrl() API to increase the buffer size.

Once we've finished transmitting the response, we need to send our close_notify. As before, this is done using SSL_shutdown(). Unfortunately, things get a bit trickier when the server closes first. Our first call to SSL_shutdown() sends the close_notify but doesn't look for it on the other side. Thus, it returns immediately but with a value of 0, indicating that the closure sequence isn't finished. It's then the application's responsibility to call SSL_shutdown() again.

It's possible to have two attitudes here. We could decide we've seen all of the HTTP request that we care about. We're not interested in anything else. Hence, we don't care whether the client sends a close_notify or not. Alternatively, we strictly obey the protocol and expect others to as well. Thus, we require a close_notify.

If we have the first attitude then life is simple. We call SSL_shutdown() to send our close_notify and then exit right away, regardless of whether the client has sent one or not. If we take the second attitude (which our sample server does), then life is more complicated because clients often don't behave correctly.

The first problem we face is that clients often don't send close_notifys all. In fact, some clients close the connection as soon as they've read the entire HTTP response (some versions of IE do this). When we send our close_notify, the other side may send a TCP RST segment, in which case the program will catch a SIGPIPE. We install a dummy SIGPIPE handler in initialize_ctx() to protect against this problem.

The second problem we face is that the client may not send a close_notify immediately in response to our close_notify. Some versions of Netscape require you to send a TCP FIN first. Thus, we call shutdown(s,1) before we call SSL_shutdown() the second time. When called with a “how” argument of 1, shutdown() sends a FIN but leaves the socket open for reading. The code to do the server shutdown is shown in Listing 7.

Listing 7. Calling SSL_shutdown()

What's Missing

In this article, we've only scratched the surface of the issues involved with using OpenSSL. Here's a (nonexhaustive) list of additional issues.

A more sophisticated approach to checking server certificates against the server hostname is to use the X.509 subjectAltName extension. In order to make this check, you would need to extract this extension from the certificate and then check it against the hostname. Additionally, it would be nice to be able to check hostnames against wild-carded names in certificates.

Note that these applications handle errors simply by exiting with an error. A real application would, of course, be able to recognize errors and signal them to the user or some audit log rather than just exiting.

In the next article, we'll be discussing a number of advanced OpenSSL features, including session resumption, multiplexed and nonblocking I/O and client authentication.

Acknowledgements

Thanks to Lisa Dusseault, Steve Henson, Lutz Jaenicke and Ben Laurie for help with OpenSSL and review of this article.

Resources

Eric Rescorla has been working in internet security since 1993. He is the author of SSL and TLS: Designing and Building Secure Systems (Addison-Wesley 2000).