Contributing to the Linux Kernel—The Linux Configuration

Joseph Pranevich

Issue #78, October 2000

Learn the correct procedures for submitting a patch to the kernel.

The Linux kernel has always been one of the most prized gems in the Open Source community. Based around a philosophy of shared resources through modularity, it somehow is both well-written and written by committee. (Or, at least, by many individuals and teams which argue/agree over features.) One of the methods by which Linux keeps everything neat and modular is the kernel configuration system, often referred to as config, menuconfig and xconfig. These are the scripts that an installer of a source kernel must run in order to set up the kernel options, but you probably know that if you are reading this. On the outside, these look like three very separate programs with completely separate interfaces. In reality though, all three draw from the same fundamental rules that many programmers of the Linux kernel must know in order to spread their work or even to submit their patches to Linus. It is this fundamental system that gives Linux users the options they need to design a Linux system based on their needs.

Since the Linux kernel is an open-source project, it obviously accepts submissions from its users for new features. Often, however, programmers with the desire and the know-how to add features to the Linux kernel choose not to for a variety of reasons. In this article, I hope to clear up some of the mysteries surrounding the kernel configuration system that may be hindering users and keeping them from becoming developers. Every brain counts in open-source efforts, and every programmer who adds his or her changes into the kernel makes the kernel more robust for the rest of us.

What's in a Patch?

To start off with, there has to be a reason you are mucking about in the kernel configuration scripts in the first place. Maybe you are just exploring the system and awaiting the day when you too will be submitting patches to the kernel. Or maybe (and more likely) you have added a particular feature to the kernel that you feel deserves some more widespread use, but you want to have it ready to integrate for Linus or Alan or another kernel-developing guru. For the purposes of this article, I will use a hypothetical patch to make the random device driver a compile-time option, although I should stress that in reality I had absolutely nothing to do with the creation of that driver. (This is the driver that controls the /dev/random and /dev/urandom devices.) Also, I will not be discussing in depth the creation of kernel modules in this text—I will assume you can extrapolate how to do it from this article, especially if you were smart enough to create a modularized driver in the first place.

Choosing Your Config Name

The first step in modularizing your program should be obvious: you need some name that the C preprocessor can recognize to help it sort out the differences between what changes are yours and what are not. The kernel handles this distinction through the use of preprocessor instructions: the #ifdef ... #else .. #endif constructs throughout the kernel.

The first thing to make sure of when you do this is to be consistent. In a system as complicated as the Linux kernel, a little bit of consistency can save a lot of headaches later. You should look in Documentation/Configure.help for similar options and check to see if they have a common prefix (after CONFIG_, of course). For example, all block device options start with CONFIG_BLK_DEV_. This is relatively easy to change later, of course.

Once the name is selected, you should make #ifdef...#endif blocks around portions of the code that your patch changes (having a Linus tree around when you do this helps, as you can diff it and easily see what you changed). If you removed existing code, you'll need to integrate the #else blocks from the real tree, unless you were smart enough to keep them around while you were writing your patch. (I usually use the construct “#if 0” early in the programming stage.) At this point, compiling the kernel should work, and your option will be correctly disabled and we can continue to the next step. If it doesn't work or portions of your patch are still present, you obviously need to go back and double-check your diffs.

For the purposes of my example, I would choose the name CONFIG_RANDOM for the option. The random devices are character devices, and at the time of this writing, there was no CONFIG_CHAR_( or similar) prefix in common use.

The Configure Scripts (Config.in)

The next step we need to take is to add the new configuration option to the configure system. Fortunately, this is fairly easy with only a couple of warnings. In the directory where you have the majority of your patch (in my example, drivers/char), there will be a file called 'Config.in' which contains the configuration options for the code in that directory. It is possible to put the config option in a different directory's config file, but it obscures the readability a little and may make it difficult to locate your code later. However, if it definitely belongs somewhere other than where you have it (or if the location of your code does not have one of those files), you should use your own best judgment and be prepared to move it later. Browsing through this file, you will see that it contains what appears to be a rough scripting language similar to Bash or another shell script. This scripting language is called, easily enough, “Config Language” and should not be terribly difficult to get your arms around. For the purposes of our non-modular example, we don't need to work with the full vocabulary of the language and can concentrate on only a few keywords (defined below). For a more complete guide to the language, a complete reference is provided with newer kernels (Documentation/kbuild/config-language.txt). There are plenty of examples provided in the actual configuration files, however, and the language is simple enough that a real understanding of the language and syntax is not required for normal maintenance. In general, lines in this file are formatted with one or more keywords (called verbs) followed by some arguments. Here is a partial list of verbs and their meanings:

  • comment: An unparsed comment except when preceded by the mainmenu_option command which would cause the comment to be used as a heading.

  • mainmenu_option: A verb that makes the next comment into a heading. I cannot explain enough how odd this seems to me.

  • bool: Boolean (yes/no) configuration option. This verb is always followed by a question and a configuration variable to put the result (“y” or “n”) in.

  • tristate: A value similar to a bool but with the additional “make as module” possibility denoted as “m”. This is applicable only to device drivers.

  • if... fi: A conditional block that is evaluated only if a certain configuration variable is set.

The idea here is to locate the section of the file which corresponds to where you would like your option to be in the configuration programs. This should naturally be the location where your patch is most related to the other options provided. Once you have located where it would go, you should format a line similar to the following with your own information thrown in:
bool 'Random driver support' CONFIG_RANDOM
(Please note here that a' is used as the quote character. This can be easy to miss.)

Config File for CONFIG_RANDOM

If your configuration option relies on another to be set, this model becomes more complicated. You will need to surround your options with an if ... fi block that tests the prerequisite option. There are a number of examples in the assorted configuration files to help you with this process; when in doubt, copy. One final word: you should be aware that this file is used not only to generate the selection lists in the configuration processes, but also to generate the include/linux/autoconf.h file. In order to preserve the readability of that file, you should be careful that options you add do not come after other subheadings or the configuration option will not appear in the right place when that file is generated. (Of course, it will still work no matter where it is in the file, but for readability, this is something to consider.)

Setting up the Default Configs

At this point, you have your patch surrounded by defines which correspond to configuration options. You can now toggle the use of your patch in the configurator. The hardest part is done, now we just need to fill in some loose ends.

As you have probably noticed if you have used Linux on more than one architecture, there are different options for each of the different platforms. Thus far, you have not concerned yourself with making much of that distinction, but now it is time. In order to modify the defconfig file the right way, you'll need to take a couple of steps. First, you should back up your .config file with your personal configuration settings. Replace that file with a copy of arch/<whatever>/defconfig and rerun the configurator. Select whatever option you would like to be the default for your config option, and save that file. Replace defconfig with the new .config and replace the old one. You now have a new default configuration file built for your architecture.

If your patch works for multiple architectures (for example, it's a generic network protocol type or something that is generally applicable), you'll want to make default config files for all the architectures it supports. This can be done most easily be repeating the steps above, except first changing the ARCH line in the source Makefile to reflect the architecture you are building the config file for.

The Help File

The final and often overlooked portion of a patch is the help file that must accompany the configuration option. The file in question is Documentation/Configure.help. The format of that file is something like this (or see the attached example):

<description>
<variable name>
<help file>
In addition, it should be noted that there must be an extra blank line between config files, and newer kernels support having blank lines in the help text itself, provided that the blank line actually contains a space or other white space.

It is highly advised that you attempt to locate a portion of this file that roughly corresponds to what your option is for. Often, but not always, options in similar places in the configuration menus will have similar places in the help file, and that can serve as a helpful indication as to the best place to put your particular piece. If you still do not know where to put everything, I advise sending e-mail to the current help maintainer with a question and a brief description of what your patch does (maybe even include the help text you would like to have added).

Conclusion

You should be done at this point. Before you can send off your patch for submission, it is wise to compile it both enabled and disabled and make sure both kernels work properly. If there are dependencies, make sure they are working correctly and that all the options you would expect to have, you have, and vice versa. And finally, you should send your patch to the kernel list and request bug reports before you announce it as being done to Linus and the gang, or be prepared for a heavy dose of reality, especially if you made changes that impact architectures you don't actually have.

CML2: A New, Easier Kernel Configuration System by Eric S. Raymond

email: jpranevich@lycos.com

Joseph Pranevich (jpranevich@lycos.com) is an avid Linux geek, and while not working for Lycos, enjoys writing (all kinds) and working with a number of open-source projects.